Floor & Roof Drains

ALPINE STEEL offers expanding range of floor drains, roof drains, shower drains, floor Clean Outs, and floor gullies as per designer’s requirements. Our range comprises standard and customized solutions with vertical and horizontal spigot connection.

FLOOR & ROOR DRAINS,

SHOWER DRAINS, FLOOR CLEANOUTS

BACKWATER VALVE

Products

Three piece Shower drain

AGSD 301
6”x6” Square frame and round strainer and blind plate, for 3” and 4” pipe size, stainless steel 300 series, blind solid round plate, and strainer.

Open strainer Shower drain

AGSD 302
6” x 6” square frame with round grating, No hub pipe connection, Open strainer, Cast Brass or Stainless steel 300 series.

Floor drain

AGSD304
6”x6” Square frame, for 3” and 4” pipe size, stainless steel 300 series, blind solid Square plate, and round strainer.

Angle Drain W 45 Degree grate

C911
Cast Iron Body and Slope grate, for 6” Pipe size outlet the grate free area is 20 in2, and for 4” (9 in2). No hub outlet. This type of drain is used in elevator pits, pools, and trenches where a side wall outlet is required. The angle rate is located in the wall to prevent blockage by debris.

Angle Drain W 45 Degree grate

C911-90deg
Cast Iron Body and Slope grate, for 6” Pipe size outlet the grate free area is 20 in2, and for 4” (9 in2). No hub outlet. This type of drain is used in elevator pits, pools, and trenches where a side wall outlet is required. The angle rate is located in the wall to prevent blockage by debris.

Back Water Valve

C916
Used for drain lines to safeguard lower areas from sewer backup. Body Cast Iron, Bolted Cover sealed with a gasket, offset inlet (hub) and outlet (spigot), flapper bronze cast swing assembly.